Established Houses
Look for old layers, soft spots, movement, uneven boards and changed doorway heights before laying a new finish.
Updating a Kentville home, basement or secondary suite? Compare vinyl, laminate, engineered hardwood and tile by room, not just by colour. Explore products and try flooring styles online with The Tile Shoppe. Our physical Atlantic Canada showroom is in Moncton, New Brunswick, not Kentville.
Published driving estimates are roughly three and a half to four hours each way. Routes and conditions vary, so check current directions before making plans.
The Tile Shoppe Moncton currently advertises 12 selected 7mm SPC wood-look vinyl styles at $1.95 per square foot in store. Browse the colours first and compare the full cost of the project before planning a trip.
In-store promotion on selected colours only, subject to stock and change. Call Moncton to confirm product, quantity and pickup before travelling.
See the 12 Featured Colours
An older family home, an updated basement and a newly created suite can need very different floor preparation. In Kentville, start with the condition of the building and the use of the room, then compare materials that fit those conditions.
Look for old layers, soft spots, movement, uneven boards and changed doorway heights before laying a new finish.
Where a home has a history of moisture or water entry, correct that issue first. A water-resistant plank is not a drainage solution.
Choose easy-care surfaces, but confirm any building requirements for sound, fire separation and installation with qualified professionals.
Think about transition strips, flush walking surfaces and ease of cleaning, especially when reducing trip edges is important.
Photograph the floor underneath, wall-to-floor edges, thresholds and stairs. These details are often more useful than a room length alone.
Filter your shortlist by where the product will be installed and the finish you want. A category name alone does not establish basement suitability, water resistance or warranty coverage.
Plank and stone-look options for a range of household rooms, with use and moisture limitations set by each product.
Shop now →
Wood-look choices for suitable living areas and bedrooms. Compare wear ratings, subfloor flatness and moisture instructions.
Shop now →
Real wood surfaces for rooms where grain, texture and natural character are part of the design priorities.
Shop now →
Find sizes and finishes intended for specific bathroom, shower, kitchen, entry and wall or floor projects.
Shop now →
Small-format details for kitchen splashes, bathroom accents, niches and decorative wall treatments.
Shop now →
Compare the substrate preparation, underlays, mortar, grout, waterproofing and edging pieces your project calls for.
Shop now →Flooring should suit the exposure, traffic and underlying structure of each space. Use these room-specific checkpoints to make an initial shortlist before choosing colours.
Tracked-in rain, slush and grit put cleaning and surface durability first; decide how the entrance floor meets adjoining spaces.
Inspect for seepage or dampness and test as the flooring manufacturer requires; below-grade approval matters more than a waterproof label.
Think about spills, everyday cleaning, appliance movement and the finished height where the room joins the hall.
Choose suitable tile and the compatible preparation, slope and waterproofing system before judging appearance.
Consider sound, underfoot comfort, sunlight, plank scale and whether trim or stairs will remain the same.
Select finishes with upkeep and later repairs in mind, while checking building rules for sound and separation where relevant.
A sample or product photograph may look quite different beside the cabinets, paint and light already in your home. Use the room visualizer to compare flooring looks in a photo of your space, then check a physical sample before confirming the final tone and texture.
Luxury vinyl can be worth comparing for a busy entry, a renovated suite or an open-plan main floor. Start with wear rating, thickness, locking method and the exact manufacturer guidance for the room rather than assuming all vinyl performs the same way.
In a lower-level room, moisture testing and approved subfloor preparation come before the colour choice. For rental spaces, consider repeatable products and how easily a damaged plank could be matched in future.
Laminate may suit a bedroom, home office or living room where a wood look is wanted and room conditions fit the product. Compare the actual wear rating, edges, underlayment requirements and water exposure limits before ordering.
In a house with an older subfloor, preparation can be more important than board thickness. In an attached unit, ask the installer to check acoustic requirements rather than assuming that any foam pad is acceptable.
Tile can work well for a kitchen backsplash, entry, fireplace surround or complete bathroom renovation when it is specified for the surface. Check finish, slip characteristics and substrate requirements instead of choosing by pattern alone.
A shower is a waterproofing project as well as a tile project. Set the drainage, membrane, mortar and movement-joint details with your installer before ordering the decorative pieces.
Not every Kentville property has the same floor conditions. Before settling on a finish, work through the questions that apply to your building. The right preparation may change which product makes sense and how much material you need.
Where seepage or flooding has occurred, resolve the source and have the substrate assessed before covering it. Water-resistant planks cannot keep floodwater out of a home.
Coordinate the finish with the approved construction plan. Confirm local building rules for fire separation, acoustics and door clearances with qualified people.
Compare subfloor, underlayment and finish thickness at doors, hallways, landings and steps, especially if level transitions matter to the occupants.
Inspect for movement, loose boards, damage or high spots; correct issues before installing a floating plank or setting tile.
Flood concerns and building permissions vary by property. Check your own site conditions, product instructions and applicable local requirements rather than assuming a town-wide rule.
Contractors and renovators planning several units, suite conversions, home updates or commercial interiors can benefit from comparing the complete materials order first. The Tile Shoppe Pro program may be an option for eligible trade customers; confirm current terms with Moncton.
Relevant to flooring installers, renovators, builders, designers and rental-property owners planning material quantities.
The Tile Shoppe has no showroom in Kentville. Local flooring retailers are available in the Annapolis Valley. If a Tile Shoppe product or the Moncton in-store promotion interests you, compare specifications online first and contact the actual Moncton location to see whether a planned visit is worthwhile.
Ask about the exact style, box quantity, sample status and pickup conditions before travelling. Distance and travel costs are part of a fair total-project comparison.
120 Halifax St Unit E, Moncton, NB E1C 9S1
A long, multi-hour trip. Published journey estimates vary between roughly three and a half and four hours, so confirm current routing, weather, store hours and product availability before setting out.
These customer reviews describe The Tile Shoppe and its store experience. They do not represent a Kentville branch or reviews collected at a Kentville location.
Useful answers for Kentville and Annapolis Valley home projects, including how to compare products before any possible trip to Moncton.
No. There is no Tile Shoppe location in Kentville or the Annapolis Valley. The company's physical Atlantic Canada showroom is in Moncton, NB. You can explore flooring and tile online before contacting that store.
It is a multi-hour trip. Published driving references are roughly three and a half to four hours each way, depending on route and conditions. Check current directions, and confirm product availability before travelling.
The Moncton showroom currently advertises selected 7mm SPC vinyl styles at $1.95 per square foot in store. Colours and available quantities can change. It is not a guaranteed Kentville price or delivery offer.
No. Vinyl planks may resist some water exposure, but they do not stop flooding, drainage problems or moisture in concrete. Resolve those issues first and follow the chosen product's subfloor requirements.
No. Flood exposure is property-specific. Kentville has documented flood impacts and areas requiring attention, but a town-wide assumption would be misleading. Assess the particular building and consult official local information when needed.
Check the total thickness of the finish, underlayment and transition piece at doors and stairs. A qualified installer should assess any change that could create a trip edge or affect a step.
Confirm applicable approvals and building requirements, including sound, fire separation and finished-floor height, with the appropriate professionals. Then choose a suitable, maintainable flooring product.
Yes. Browse porcelain, ceramic and mosaic tile for suitable bathrooms, shower walls and kitchen projects. A shower also needs correctly planned preparation and waterproofing beneath the tile.
Yes. Use The Tile Shoppe room visualizer to compare colours in a photograph of your own room, and check a real sample before the final purchase decision.
No. The Tile Shoppe supplies flooring, tile and installation products, but customers arrange their own installers. Eligible trade customers can also ask the Moncton team about Tile Shoppe Pro.
Start with photographs and room measurements, compare finishes that suit the subfloor, and note everything required to complete the installation. If a Tile Shoppe product interests you, speak with Moncton about its availability before deciding whether a visit is worthwhile.